Home nederlands > Systemen > Omgekeerde Osmose systemen > Small Reverse Osmosis Plant

Small Reverse Osmosis Plant

Low energy or high rejection membranes

All equipment mounted on stainles steel 304 skid

Available in complete Stainless Steel piping

Standard control with RO micro-controller and conductivity display

Advanced control with flow, pressure, pH and conductivity transmitters for data monitoring, normalisation and SCADA.

The system includes:

5 microns filter

High pressure pump

RO or NF membranes 4 " membranes

Fiber glass pressure vessels

Standard or advanced instrumentation

Option: antiscalant dosing station

Type BWRO S	*250*	*500*	*750*	*1000*	*1500*
Permeate flow * l/h	250	500	750	1000	1500
Feed flow l/h (80% recovery)	315	625	940	1250	1875
Rejection	>96 % osmose Inverse, 80% Nanofiltration
*Connections*
Feed	DN 25, PVC glue
Permeate	DN 20, PVC glue
Concentrate	DN 20, PVC glue
Power 400v, 50Hz**	1.5 kW	2.2 kW	2.2 kW	2.2 kW	3.0 kW
*Dimensions (mm)*
Length	1100 1800 450
Width
Height

* under standard conditions: TDS< 1500ppm, temperature = 25^oC, pH = 7.5
** Also available in 60 Hz

These data are given for information purpose only. They are subject to modifications depending on the water quality.

Reverse Osmosis or Nanofiltration units often required pre-treatment for the following parameters:

- Suspended solids
- TOC, COD/BOD, hydrocarbons
- Iron and manganese
- Hardness

Lenntech provides all kinds of pre-treatment required before your RO, like multimedia filters, water softeners or de-ironing filters, according to your water analysis and process requirements.

Please send us your water analysis for further information.

Back to Reverse Osmosis Plants