Adsorption

21 - 30 of 82 results

Meranti tree sawdust, an inexpensive material, is currently being investigated as an adsorbent for the removal of Cu(II) and Pb(II) ions from aqueous solutions. In this work, adsorption of Cu(II) and Pb(II) ions on Meranti tree sawdust has been studied by using batch techniques. The equilibrium adso
Desalination 250 (2009)

The adsorption of C. I. Reactive Red 120 (RR120) on activated oil palm ash (AOPA) was studied in a batch system. The adsorption studies were carried out at different initial dye concentrations (50–600 mg L–1), solution pH (2–12) and temperature (30, 40 and 508C). The experimental data were analyzed
Desalination 250 (2009)

The adsorption kinetics of surfactants onto the crystal surface spin-coated with a thin layer of a model membrane material, polyethersulfone was monitored through measurements of frequency and dissipation shifts simultaneously using a quartz crystal microbalance with dissipation (QCM-D) apparatus. I
Desalination 250 (2009)

The dynamic ultrafiltration of anionic surfactant solution, sodium dodecyl benzene sulfonate (SDBS), using a rotating disk system with hydrophilic polyethersulfone (PES) membranes (MWCO 10 kDa) was studied in this paper. The effects of mean transmembrane pressure (TMP) and disk rotating speed on the
Desalination 240 (2009)

Equilibrium adsorption/desorption isotherms of organic vapor (MeOH, EtOH, i-PrOH, and Me2CO) at 298 K were measured on two hydrophobic porous coordination polymers, [Zn2(1,4-bdc)2(dabco)]n (1, 1,4-bdc ¼ 1,4-benzenedicarboxylate, dabco ¼ 1,4-diazabicyclo[2.2.2]octane) and [Zn2(1,4-ndc)2(dabco)]n (2,
Desalination 234 (2008)

Heavy metals, such as, cadmium, lead, nickel and zinc can be removed from water using sorbents. The rate and extent of removal may be enhanced by choice of appropriate sorbents. In this study heavy metal sorption was studied on indigenously synthesized carbon nanomaterials (CNMs). Two CNMs differing
Desalination 232 (2008)

Surface modification of clays has become increasingly important due to the practical applications of clays such as fillers and adsorbents. The surface modification of sepiolite with [3-(2-aminoethylamino)propyl]trimethoxysilane has been employed. The modified sepiolite surface was investigated by FT
Desalination 230 (2008)

The kinetic and thermodynamic behaviors of cationic dye adsorption onto citric acid esterifying wheat straw (EWS) from aqueous solution were investigated. Two cationic dyes, methylene blue (MB) and crystal violet (CV) were selected as adsorbates. The kinetic and thermodynamic parameters of dye adsor
Desalination 230 (2008)

In this study fixed-bed sorption filters are filled with an iron based sorbent (ferrosorp plus, FP) and used to remove a range of heavy metals (i.e. As, Cd, Cr, Cu, Ni, and Zn) from polluted water. It is found that FP is very effective at simultaneous removal of the heavy metals, and the magnitude o
Desalination 226 (2008)

Clinoptilolite, a natural zeolite, was used for the synthesis of a high surface area clinoptilolite-iron oxide system (Clin–Fe system) to be used for the removal of Mn2+ and Zn2+ ions from drinking water samples. The new system was obtained by adding natural clinoptilolite to an iron nitrate solutio
Desalination 224 (2008)