Water recovery

Brine management is a major bottleneck for coal seam gas (CSG) production in Australia. This study investigated the concentration of CSG reverse osmosis (RO) brine using a pilot membrane distillation (MD). The system was equipped with a novel spiral-wound air gap membrane distillation (AGMD) module.

A technique to optimise thermal efficiency using brine recycling during direct contact membrane distillation (DCMD) of seawater was investigated. By returning the hot brine to the feed tank, the system water recovery could be increased and the sensible heat of the hot brine was recovered to improve t

• Low cost pretreatment for RO brine recovery using inline coagulation-UF method. • Outstanding performance of FeCl3 in foulant removal compared to PACl and ACH. • 55% and N99% of DOC and phosphate removed when FeCl3 was used as the coagulant. • Highest removal of humic substances, building blocks a

In recent years, reverse osmosis (RO) has grown as an alternative to traditional potable water sources. A major disadvantage of the RO process is the huge amount of brine and its negative impact as a result of its high salinity. This brine is usually discharged to inland water bodies or to the sea a

Thermally stable nanofiltration membranes were used to recover hot water from rinsing effluents from acid and reactive dyeing operations. Two types of flat-sheet membranes, MPF-34 (MWCO 200) and MPF-36 (MWCO 1000), were tested at 60°C and 10 bar. Experiments carried out with the made-up feeds contai