Grundfos NK 125-200/226 EUP A2-F-A-E-GQQE (98753615)
Produkt ID: 98753615
Prijsaanvraag en beschikbaarheid
Grundfos NK 125-200/226 EUP A2-F-A-E-GQQE (98753615)
Niet zelfaanzuigende, eentraps centrifugaalpomp, ontworpen conform ISO 5199 met afmetingen en nominale prestaties conform EN 733. Flenzen zijn PN 16 met afmetingen overeenkomstig EN 1092-2. De pomp is voorzien van een axiale zuigpoort, een radiale perspoort en horizontale as. De pompen zijn van het 'back pull-out' type waarbij het mogelijk is om de motor, de koppeling, de lagerbeugel en de waaier te verwijderen zonder het pomphuis of het leidingwerk van zijn plaats te halen. De niet-gebalanceerde rubberen balgafdichting met gereduceerd afichtingsoppervlakte is conform DIN EN 12756. De pomp is uitgerust met een op de voet gemonteerde, ventilatorgekoelde asynchrone motor. Pomp en motor zijn gemonteerd op een gemeenschappelijk basisframe.
| Specification | Value | |
|---|---|---|
| Liquid: | ||
| Pumped liquid: | Water | |
| Liquid temperature range: | -25 .. 60 °C | |
| Liquid temperature during operation: | 20 °C | |
| Density: | 998.2 kg/m³ | |
| Technical: | ||
| Speed for pump data: | 1460 rpm | |
| Rated flow: | 272 m³/h | |
| Rated head: | 13.2 m | |
| Actual impeller diameter: | 226 EUP mm | |
| Impeller nom: | 200 mm | |
| Primary shaft seal: | GQQE | |
| Secondary shaft seal: | NONE | |
| Curve tolerance: | ISO9906:2012 3B | |
| Materials: | ||
| Pump housing: | Cast iron | |
| EN-GJL-250 | ||
| ASTM A48-40 B | ||
| Impeller: | Cast iron | |
| EN-GJL-200 | ||
| ASTM A48-30 B | ||
| Rubber: | EPDM | |
| Wear ring mat.: | Bronze (CuSn10) | |
| Installation: | ||
| Maximum ambient temperature: | 60 °C | |
| Maximum operating pressure: | 16 bar | |
| Flange standard: | EN 1092-2 | |
| Pump inlet: | DN 150 | |
| Pump outlet: | DN 125 | |
| Pressure rating: | PN 16 | |
| Coupling type: | Spacer | |
| Base frame: | C - Channel | |
| Electrical data: | ||
| Motor type: | 160LB | |
| IE Efficiency class: | IE3 | |
| Rated power - P2: | 15 kW | |
| Mains frequency: | 50 Hz | |
| Rated voltage: | 3 x 380-415D/660-690Y V | |
| Rated current: | 29,0-28,0/16,8-16,4 A | |
| Starting current: | 760-870 % | |
| Cos phi - power factor: | 0,86-0,82 | |
| Rated speed: | 1460-1470 rpm | |
| Efficiency: | IE3 92,1% | |
| Motor efficiency at full load: | 92.1 % | |
| Motor efficiency at 3/4 load: | 92.3 % | |
| Motor efficiency at 1/2 load: | 92.1 % | |
| Number of poles: | 4 | |
| Enclosure class (IEC 34-5): | 55 Dust/Jetting | |
| Insulation class (IEC 85): | F | |
| Lubricant type: | Grease | |
| Others: | ||
| Minimum efficiency index, MEI �?�: | 0.70 | |
| ErP status: | EuP Standalone/Prod. | |
| Net weight: | 328 kg | |
| Gross weight: | 437 kg | |
| Shipping volume: | 1.11 m³ | |