Grundfos TP 25-80/2 A-O-A-BUBE (98346597)
Produkt ID: 98346597
Prijsaanvraag en beschikbaarheid
Grundfos TP 25-80/2 A-O-A-BUBE (98346597)
Grundfos TP 25-80/2 A-O-A-BUBE (98346597)
TP 25-80/2 A-O-A-BUBE
Enkeltraps, close-coupled, slakkenhuis pomp met in-lijn zuig- en perspoorten van identieke diameter. De pomp is van het "van bovenaf uittrekbaar" ontwerp, d.w.z. de motor, pompkop en waaier kunnen voor onderhoud of service worden verwijderd terwijl het pomphuis in het leidingwerk blijft. De pomp is uitgerust met een niet-gebalanceerde rubberen balgafdichting. De asafdichting is conform EN 12756. Leidingwerkaansluitingen via PN 10 verbindingen (ISO 228-1). De pomp is uitgerust met een ventilatorgekoelde asynchrone motor.
| Specification | Value | |
|---|---|---|
| Liquid: | ||
| Pumped liquid: | Water | |
| Liquid temperature range: | 0 .. 110 °C | |
| Liquid temperature during operation: | 20 °C | |
| Density: | 998.2 kg/m³ | |
| Technical: | ||
| Speed for pump data: | 2820 rpm | |
| Rated flow: | 6.32 m³/h | |
| Rated head: | 4.04 m | |
| Actual impeller diameter: | 80 mm | |
| Primary shaft seal: | BUBE | |
| Curve tolerance: | ISO9906:2012 3B | |
| Materials: | ||
| Pump housing: | Cast iron | |
| EN-JL1020 | ||
| ASTM A48-25B | ||
| Impeller: | Composite PES/PP 30% GF | |
| Installation: | ||
| Range of ambient temperature: | -30 .. 40 °C | |
| Maximum operating pressure: | 10 bar | |
| Flange standard: | UNION | |
| Pipe connection: | G 1 1/2 | |
| Pressure rating: | PN 10 | |
| Port-to-port length: | 180 mm | |
| Flange size for motor: | FT75 | |
| Electrical data: | ||
| Motor type: | 71A | |
| Rated power - P2: | 0.18 kW | |
| Power (P2) required by pump: | 0.18 kW | |
| Mains frequency: | 50 Hz | |
| Rated voltage: | 1 x 220-240 V | |
| Rated current: | 1,52-1,65 A | |
| Starting current: | 520-525 % | |
| Cos phi - power factor: | 0,85 | |
| Rated speed: | 2875-2895 rpm | |
| Motor efficiency at full load: | 62.8-59 % | |
| Number of poles: | 2 | |
| Enclosure class (IEC 34-5): | 55 Dust/Jetting | |
| Insulation class (IEC 85): | F | |
| Others: | ||
| Minimum efficiency index, MEI �?�: | 0.55 | |
| ErP status: | EuP Standalone/Prod. | |
| Net weight: | 7.4 kg | |
| Gross weight: | 8.4 kg | |
| Shipping volume: | 0.02 m³ | |